Industrial Paints, Epoxy Paints, Enamels, Stoving Enamels, Etch Primer With Hardener, Peelable Clear Lacquers, Texture Paint, Structure Finish Paint, Epoxy Stoving Paints, Epoxy ZMC Rich Primers, Acrofast Primer Surfacer Zinc Phosphate, LCF Wash Primers, Epoxy Surfacer, Intermediate Coat Zinc Phosphate ZNP, Lead And Chrome Free Paints / Primers / Thinners
Home Email Sitemap linkedin
 

Lead And Chrome Free Paints Primers & Thinners

Tuff Coat EP-101 Epoxy Paint

Tuff Coats PU-101 Enamel

Tuff Coat Stoving Enamel

Etch  Primer With Hardener

Peelable Clear Lacquer

Tuff Coat St-1 Stove Enamel

Texture / Structure Finish

Tuff Coat PU - 101 Clear Lacquer

Tuff Coats Epoxy Stoving Paint

Epoxy Zinc Rich Primer

Acrofast Primer Surfacer Zinc Phosphate

Lcf Wash Primer

Hb-285 Epoxy Surfacer / Intermediate Coat Znp

Epoxy Paints, Enamels, Stoving Enamels, Etch Primer With Hardener, Peelable Clear Lacquers, Texture Paint, Structure Finish Paint, Epoxy Stoving Paints, Epoxy ZMC Rich Primers, Acrofast Primer Surfacer Zinc Phosphate, LCF Wash Primers, Epoxy Surfacer, Intermediate Coat Zinc Phosphate ZNP, Lead And Chrome Free Paints / Primers / Thinners
 

ACROFAST PRIMER SURFACER ZINC PHOSPHATE

 
Acrofast Primer Surfacer is based on synthetic alkyd resin suitably modified with acrylic monomers &plasticizer. It contains Zinc Phosphate as anticorrosive pigment. It offers good corrosion resistance, dries faster. Any type of Top Coat can be applied over this primer coat. This primer is available in different shades like red oxide, Grey, White & Off White.
Suitable for application as a priming coat on steel structure, M.S job, pipelines FRP Sheets, & Wood, P.P., ABS. This can be Top Coated with NC paints, Enamels, Polyurethane and Epoxy paints.
It can be used as undercoat for many types of paints.
Faster drying than other synthetic primers so immediate over-coating
Resists most salts & alkalis & mild acids.
Resist to splash of aromatic & aliphatic solvents. (Immersion is not recommended)
Excellent Water & Oil/ Grease Resistance.
It is single component primer as a under coat for Polyurethane Paint with lower D.F.T.
 
Especially syn modified alkyd, plasticizer, & corrosion inhibiting pigments, suitable solvents like aromatic, ethers, & alcohol & ketones.

90 -110 Seconds by Ford Cup B4 at 300 C

Minimum 5 HG by Hegman Gauge

1.2 +/- 0.05 at 300 C by gm/cc Cup

20 to 25 Seconds by Ford Cup B4 at 300 C

AcroThinner102 / PU Thinner

Surface Dry
2 Minutes maximum
Tack Free
15 Minutes maximum
Hard Dry  
3 Hours maximum
Full Curing
48 Hours maximum

Smooth & Matt to Eggshell

Cross Cut Adhesion Test
Passes as per IS – 101

minimum 1200 Gms.

minimum 15-25

Recommended DFT 
20m
12 – 14 Sq Meter/ Liter

72 Hours Passes as per IS –101

1000 C of Dry heat

Bellow 300 C
Minimum 150 Hrs (At DFT 25m)

minimum 30 minutes.

1year minimum
4 Liter tins packing

 

Remove oil, grease & other contaminations using proper degreasing agents from Ferrous substrate. For heavy corrosive conditions blast clean the surface [for ferrous substrate] For FRP, ABS, PP clean the surface with alcohols like iso-propanol etc,

Before applying the Primer confirm that no rust particle remains on the surface. Stir the material thoroughly in the container (There may be soft settling on storage condition). Then make the paint suitable for application viscosity by using recommended thinner. Apply by conventional spray or by brush. Take care to close the container immediately after removal of paint to avoid moisture intake & loss of solvents. Do not apply in very humid condition or during the raining, fog, or mist. Also do not apply at very low temperature bellow 10 0 C
Over coating can be possible after 15-30 minutes interval.

 
 
This primer has some limitations like poor resistance to strong acids and ketonic solvents