Industrial Paints, Epoxy Paints, Enamels, Stoving Enamels, Etch Primer With Hardener, Peelable Clear Lacquers, Texture Paint, Structure Finish Paint, Epoxy Stoving Paints, Epoxy ZMC Rich Primers, Acrofast Primer Surfacer Zinc Phosphate, LCF Wash Primers, Epoxy Surfacer, Intermediate Coat Zinc Phosphate ZNP, Lead And Chrome Free Paints / Primers / Thinners
Home Email Sitemap linkedin
 

Lead And Chrome Free Paints Primers & Thinners

Tuff Coat EP-101 Epoxy Paint

Tuff Coats PU-101 Enamel

Tuff Coat Stoving Enamel

Etch  Primer With Hardener
Peelable Clear Lacquer
Tuff Coat St-1 Stove Enamel
Texture / Structure Finish
Tuff Coat PU - 101 Clear Lacquer
Tuff Coats Epoxy Stoving Paint
Epoxy Zinc Rich Primer

Acrofast Primer Surfacer Zinc Phosphate
Lcf Wash Primer

Hb-285 Epoxy Surfacer / Intermediate Coat Znp
Epoxy Paints, Enamels, Stoving Enamels, Etch Primer With Hardener, Peelable Clear Lacquers, Texture Paint, Structure Finish Paint, Epoxy Stoving Paints, Epoxy ZMC Rich Primers, Acrofast Primer Surfacer Zinc Phosphate, LCF Wash Primers, Epoxy Surfacer, Intermediate Coat Zinc Phosphate ZNP, Lead And Chrome Free Paints / Primers / Thinners
 

Peelable Clear Lacquer

INTRODUCTION
 
This is specially formulated solvent based air drying  system which sets rapidly on application as a thin coat and provides protection to underneath painted surface during handling, transportation or shipment etc. The coating can be peeled off in the form of continuous film with little efforts, keeping the underneath paint layer unaffected.
 
 
1. Suitable for application by brush or spray
2. Sets rapidly
3. V. good resistance to handling
4. Excellent water resistance
5. Excellent flexibility
6. Easy to apply and remove
 
 
Appearance    
Colorless clear liquid
Viscosity  
Around 35 sec by FB4 @ 30o  C For Spraying
Viscosity   
Around 60 sec by FB4 @ 30o  C For Brushing
 
APPLICATION METHOD :
 
Bring down the viscosity suitable for spraying using TUFF COAT Thinner ST-102,if required. For brushing no thinning  is required.
Apply three to four coats at an interval of 5-10 minutes to achieve DFT of 25-30microns.Maintain pressure 50-60 PSI.
 
 
Due to excellent all round properties the coating has versatile application in diversified fields viz. Conrol cabinets, various equipments, export quality jobs especially those requiring heavy handling and shipment. The coating can be suitably applied on properly cured stoving enamel, Epoxy Paints, PU paints, powder coatings without affecting aesthetics of the articles. Being a clear coat it does not hide the original shade of the coated article.
 
 
Only limitations of the coating is that it is not suitable for application on ( A/D ) Air drying systems. Also note that the Heat Stability of the coating is Max. 60o C. Do not apply in Acidic Environment or do not keep at Acidic Environment after application.