Polyurethane Paint 101 Exterior Grade

Go Back to - Home / Products

Introduction -

Tuff Coats PU-101 Paint is the two-component system, designed to cross link at room temperature. Base component is an acrylic polyurethane i. e. Hydroxyl Functional Acrylic copolymer (pigmented) which reacts with blocked Aliphatic Polyisocynate adduct (second component) to form tough film with outstanding durability, chemical & weather resistance. The system also gives excellent gloss and color retention properties.

THE RANGE OF APPLICATION:
An effective Top Coat for petrochemical refinery and fertilizer industries. The system is useful for maintenance coating, structural coating as well as for floor coating. Because of rapid curing at room temperature and excellent toughness and abrasion resistance, resistance to heat, oil, Alcohol Acid & salty weather, as it has excellent adhesion to any kind of substrate like metal, wood, FRP, ABS plastics, castings, the system gives wide range of application in Aircraft finishes, transport finishes, and chemical industries. Due to its excellent finish & gloss used in various industrial equipments as well as domestic equipments like washing machines, office equipments etc.

KEY PROPERTIS OF SYSTEM:
Fast drying at room temperature
It can withstand to the temperature around -15 to 100 D.C.
a) Weather Resistance - Excellent colour & gloss retention even in sunlightExposure
b) Alcohol Resistance - Unaffected by splash and spillage
c) Salts - Unaffected
d) Water Resistance - excellent water & salty water resistance (not recommended for immersion)
e) Oil & grease - Unaffected

PRODUCT DATA ( TUFF COATS PU-101 PAINT\Non-Yellowing Grade )
Type Two-pack system pigmented or clear cold cured. Pigmented acrylic copolymer polyurethane.
Hardener Clear blocked aliphatic Polyisocynate system with catalyst.
Mixing Ratio Base: Hardener - 4:1 by volume.
Storage life Individual up to 6 months as long as the sealed containers are kept under cover in dry place Pot life after mixing base & hardener - is 4 to 5 hrs.
Application Brush, Roller & Spray with using TC/PU-101 Thinner
Recommended DFT 40 to 50 microns per coat.
Covering/Spreading Rate 12-14 Sq. Mtr / Ltr. By brushing.
Drying time Touch Dry - 45-60 min.
Dry to Handle - 4-6 hrs.
Hard Dry - 16 hrs.
Complete Cure Time 6 to 7 days
Salt Spray Corrosion Test 500 hrs ( with 5 % NaCl )
Over Coating Interval Minimum 6-8 hrs, Maximum 3-4 days
Flash Point Above 22° C
Shade As per Requirement.
Packing 20 Ltr., 10 Ltr., & 4 Ltr.
Finish Glossy or Semi glossy as per requirement.
Thinner TC/ PU-101 Thinner.

APPLICATION -

Before application of Topcoat PU –101 Enamel do all necessary pretreatment of the job. For M. S. surface remove grease, oil & other contamination by using proper de-rusting & Phosphating chemicals to clean surface. Apply properly TUFF COAT PU- 101-primer Coat / Ep-101 Epoxy Red Oxide Primer / Grey Primer / Zinc Rich Primer or Hi-Build wash primer. After proper drying of primer coat apply PU-101 Enamel. For old concrete remove salt deposition/ fungal growth, loosely bound coatings, dust particles and make the surface rough. Also for new concrete do the needful pretreatment /priming and then apply Topcoat PU-101 Enamel. Stir the base component thoroughly & mix four parts of base & one part of hardener by volume to uniform consistency. Keep it for 15-30 min for stabilization & stir again before use. Make required viscosity as per application method with TC/PU 101 Thinner. Mix the above material as per requirement because of 4-5 hrs.

Pot life: -close the containers immediately to avoid the chances of the moisture absorption in material. Do not apply in humid condition during the raining, fog or mist or at very low temperature i. e. bellow 7° C
Stability of Hardener - Once the hardener container is opened; try to consume it immediately because it reacts with Hydroxyl groups present in atmosphere & it results in to geletion


Polyurethane Paint 101 Interior Grade

Go Back to - Home / Products

Introduction -

Tuff Coats PU-101 Enamel is the two component system, designed to cross link at room temperature. Base component is an acrylic polyurethane i. e. Hydroxyl Functional Acrylic copolymer (pigmented) which reacts with blocked Polyisocynate adduct (second component) to form tough film with outstanding durability, chemical & weather resistance. The system also gives excellent gloss and color retention properties.

RANGE OF APPLICATION
An effective Top Coat for petrochemical refinery and fertilizer industries. The system is useful for maintenance coating, structural coating as well as for floor coating. Because of rapid curing at room temperature and excellent toughness and abrasion resistance, resistance to heat, oil, Alcohol Acid & salty weather, the system gives wide range of application in Aircraft finishes, transport finishes and chemical industries.

KEY PROPERTIES
Fast drying at room temperature
It can withstand to the temperature around 100 D.C.
a) Weather resistance - excellent colour & gloss retention
b) Alcohol resistance - Unaffected by splash and spillage
c) Salts - Unaffected
d) Water resistance - excellent water & salty water resistance (not recommended for immersion)
e) Oil & grease - Unaffected


Polyurethane Paint Acro-Siloxane & HR 250

Go Back to - Home / Products

Introduction -

Acro- siloxane PU Paint is the two-component system, designed to cross link at room temperature. Base component is silicone modified acrylic- silicone polyurethane i. e.
Hydroxyl Functional Acrylic copolymer (pigmented) which reacts with blocked Aliphatic Polyisocynate adduct (second component) to form tough film with outstanding durability, chemical & weather resistance. The system also gives excellent gloss and color retention properties along with Heat resistance up to 250° C

RANGE OF APPLICATION
An effective Top Coat for petrochemical refinery and fertilizer industries. The system is useful for maintenance coating, structural coating. Because of rapid curing at room temperature and excellent toughness and abrasion resistance, resistance to heat, oil, Alcohol Acid & salty weather, as it has excellent adhesion to any kind of substrate like metal, wood, FRP, ABS plastics, castings, the system gives wide range of application in Aircraft finishes, transport finishes, and chemical industries. Due to its excellent finish & gloss used in various industrial equipments It is also used in the systems where dry heat resistance required up to 200-250°C

KEY PROPERTIES
a)Fast drying at room temperature
b) It can withstand to the temperature around -150° to 250°D.C.
c) Weather resistance - Excellent colour & gloss retention even in sunlight Exposure
d) Alcohol resistance - Unaffected by splash and spillage
c) Salts - Unaffected
d) Water resistance - excellent water & salty water resistance
e) Oil & grease - Unaffected
f) Heat Stability - Excellent Up to 250°C

PRODUCT DATA ( Acro - siloxane PU Paint / H R- PU Paint)
Type Two-pack system pigmented or clear cold cured. Pigmented acrylic-Silicone copolymers with catalyst.
Hardener Clear blocked aliphatic Polyisocynate system
Mixing Ratio Base: Hardener - 4:1 by volume.
Storage life Individual up to 8 months as long as the sealed containers are kept under cover in dry place Pot life after mixing base& hardener - is 2 to 3 hrs.
Application Brush, Roller & Spray with using TC/PU-101 Thinner. Do not use Thinner while applying- Texture/Structure finish paint
Recommended DFT 40 to 50 microns per coat.
Covering/Spreading Rate 12-14 Sq. Mtr / Ltr. By brushing.
Drying time Touch Dry 45-60 min.
Dry to Handle 4-6 hrs.
Hard Dry 16 hrs.
Full Cure Time 6 to 7 days
Salt Spray Corrosion Test 500 hrs ( with 5 % NaCl )
Over Coating Interval Minimum 4-6 hrs, Maximum 3-4 days
Flash Point Above 22° C
Shade As per Requirement.
Packing 4 Ltr. & 1 Ltr.
Finish Glossy / Semi glossy /matt or texture/structure
Dry Heat Resistance Up to 250° C.
Scratch Hardeners Above 2000 Gms.
Flexibility Passes 6 mm- 36 mm mandral.
Thinner PU - Thinner.

APPLICATION
Before application of Topcoat Acro- siloxane PU Paint Enamel do all necessary pretreatment of the job. For M. S. surface remove grease, oil & other contamination by using proper de-rusting & Phosphating chemicals to clean surface. Apply properly TUFF COAT
Coat / Ep-101 Epoxy Red Oxide Primer / Grey Primer / Zinc Rich Primer or Etch wash primer. After proper drying of primer coat apply Acro- siloxane PU Paint Stir the base component thoroughly & mix four parts of base & one part of hardener by volume to uniform consistency. Keep it for 15 min for stabilization & stir again before use. Make required viscosity as per application method with PU 102 Thinner. Mix the above material as per requirement because mixture is having limited pot life 2-3 hrs only. Close the containers immediately to avoid the chances of the moisture absorption in material. Do not apply in humid condition during the raining, fog or mist or at very low temperature i. e. bellow 7° C

Stability of Hardener - Once the hardener container is opened; try to consume it immediately because it reacts with Hydroxyl groups present in atmospheric moisture &
it results in to geletion

Reach us

Contact Details

Tuff Coat Polymers Pvt. Ltd.

S. No. 39, 1133, Manikbaug, Vadgaon (Bk.), Sinhagad Road, Pune - 411 051, Maharashtra, India.

Tel No.: +91 - 20 - 24351394 / 24353137

Cell No.: +91 98227 62122